 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Optiva Standard, 1 Composite Video and 1 Duplex 10/100 Mbps Ethernet TM OTS-1V1ETR Composite Video and Ethernet The OTS-1V1ETR provides for the digital transmission of 1 Channel of Composite Video and 1 Channel of Duplex 10/100 Ethernet. Ethernet Data In Ethernet Data Out Video System Design All units come in an insert card version. The cards can be inserted into our 16-slot, 19" rack-mountable card cage (OT-CC-16-100) or one of our smaller OptivaTM Desktop Card Racks (OT-DTCR Series). The OptivaTM Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See "Accessories" for power supply specifications. OptivaTM Upgrade Path This system can be purchased without an optical port as an add-on to an existing OptivaTM system daisy-chain. (See "Non-Optical Version" below). The OptivaTM bandwidth requirement of this system is 523 Mbps. S T A T U S A L E R T S T A T U S A L E R T Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. Composite Video Out ST, LC, SC or FC For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See "OptivaTM Upgrade Path". Audio Composite Video In ST, LC, SC or FC TM Optiv a TM Optiv a Data VAD Transmission VAD Transmission OTS-1VT1ETR OTS-1VR1ERT Ethernet Features * Composite Video and Ethernet over one fiber * 10-Bit Digital Transmission * TDM - Single fiber, dual wavelength * Complies with SMPTE standards for Video transmission * Compatible with MDM-7000 Series for WDM and CWDM multiplexing * No EMI or RFI and no ground loops * Stand alone or rack-mount * Ideal for Professional AV applications Versions Available* Wavelength (nm) & Fiber 1310/1550 Multimode 1310/1550 Singlemode 1310/1550 SM (D) 1310/1550 SM (H) 1270-1610 SM (CWDM) Non-Optical Version Transmit/Receive** OTS-1VT1ETR-A1/A3M-XX-IC OTS-1VT1ETR-A2/A3-XX-IC OTS-1VT1ETR-A2/A3D-XX-IC OTS-1VT1ETR-A2/A3H-XX-IC OTS-1VT1ETR-L4/L4-XX-IC OTS-1VT1ETR-NOC-IC Receive/Transmit** OTS-1VR1ERT-A3M/A1-XX-IC OTS-1VR1ERT-A3/A2-XX-IC OTS-1VR1ERT-A3D/A2-XX-IC OTS-1VR1ERT-A3H/A2-XX-IC OTS-1VR1ERT-L4/L4-XX-IC OTS-1VR1ERT-NOC-IC Optical Connector ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC N/A Optical Budget (dB) 10 12 17 25 Varies N/A Range*** (km) Form Factor 3 20 40 60 20-70 N/A IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 * info@opticomm.com * www.opticomm.com * Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Composite Video, Audio & Data Video Standard Bit Resolution Level Bandwidth Differential Gain Differential Phase Compatibility Signal to Noise Ratio Connector Data Standard Data Rate Connector General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring SMPTE 170M; RS-250C 10-Bit Processing; 10-Bit Transmission 1.0 Volt p-p 5.5 MHz < 1% < 0.7 NTSC, PAL > 67 dB BNC (IEC 60169-8) OptivaTM Multi-Signal OptivaTM Configurable Transmission Platform Communication Platform Network Management Network Management SDI and HD-SDI SDI & HD-SDI Composite Video, Composite Video, Audio & Data Audio & Data Audio/FSK/Intercom RGB/VGA/DVI RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) Data (Ethernet/Serial/USB) CATV/RF & L-Band CATV/RF & L-Band Optical Switching, Routing Optical Switching, Routing & Redundancy & Redundancy 11 oz Passive Multiplexing Passive Multiplexing Solutions Solutions Enclosures, Racks Enclosures, Racks & Frames & Frames Power Supplies Power Supplies and Accessories & Accessories Ethernet IEEE 802.3 (Auto-Negotiation) 10/100 Mbps RJ-45 UTP Insert Card (IC): 6.3" L x 0.8" W x 4.0" H -20 C to +55 C -40 C to +85 C 0 to 95% non-condensing 9-12 VDC 1 Amp Max per Insert Card Less than 1ms LED Status Indication Compatible with OptivaViewTM SNMP Management Suite MADE IN THE USA Sample Configuration |
Price & Availability of OTS-1VT1ETR-A2A3H-FC-IC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |